Expansion Factors 4.0
Understand how Expansion Factors are calculated using various datasets and their application across different road types and vehicle groups.
For step-by-step instructions on using Expansion Factors in the platform, see Expansion Factors in the User Guide.
Expansion Factors are only available in the USA.
An expansion factor is the ratio of total traffic to the traffic that Altitude observes, for a given zone, road type, vehicle group, and year. Multiply an Altitude volume by the matching factor to estimate the volume for all vehicles in that group. A factor of 120, for example, means Altitude observes about one vehicle in 120. Factors are larger where Altitude observes a smaller share of traffic, and they fall over time as that share grows.
Use expansion factors to:
- Scale observed volumes on a corridor or study area to total traffic
- Estimate total Medium and Heavy truck volumes from observed commercial fleet activity
- Express observed activity in terms of all vehicles on the road, for exposure and safety analysis
- Understand how much of a county's or state's traffic that Altitude observes
Years available
Expansion Factors are available for 2022 through 2025 for every state and county. The 2022 to 2024 factors are built on estimated Average Annual Daily Traffic (AADT). The 2025 factors are projected from forecast AADT and cannot be validated until the Federal Highway Administration (FHWA) Highway Performance Monitoring System (HPMS) publishes 2025 data, so treat them as indicative. Because of that switch in input, 2025 Medium factors move more than other years and are not directly comparable with earlier years.
For more information about when new AADT estimates are published, refer to When is the latest year of AADT available?
Data sources
Expansion Factors are calculated based on the following datasets:
- Altitude Observed Counts
-
Average daily traversals of Geotab-connected fleet vehicles on each road segment, for each vehicle group, over a calendar year. The December BaseMap for each year is the segment reference.
- Altitude AADT
-
Segment-level estimates from three Altitude AADT models (Universal, Medium, and Heavy), trained on FHWA HPMS data for 2022 to 2024 and on time series projections for 2025. Each estimate must pass the AADT delivery standards before use.
- FHWA Highway Performance Monitoring System (HPMS)
-
The ground truth that the AADT models are trained on and that the factors are validated against. HPMS truck classes are defined by number of axles and trailer configuration, which do not map directly to gross vehicle weight rating (GVWR), so each vehicle group is trained on the HPMS truck classes closest to it.
Vehicle registration data is no longer used.
Road type coverage
Altitude publishes factors for each of these road types and for All, which combines all five:
| Road type (OpenStreetMap highway value) | Description |
|---|---|
Motorway |
Motorways |
Trunk |
Trunk roads |
Primary |
Primary roads |
Secondary |
Secondary roads |
Tertiary |
Tertiary roads |
All |
All five road types combined |
Collectors, local and other roads are not available.
Vehicle groups
Altitude provides Expansion Factors for each of the following vehicle classification groupings:
- Universal
- All vehicles, all weights, commercial and non-commercial. Use to estimate the total market size across all vehicle types.
- Heavy
- Commercial vehicles in GVWR Classes 6 to 8 (19,501 lbs and over). Use to estimate the market size specifically for commercial heavy-duty vehicles.
- Medium
- Commercial vehicles in GVWR Classes 3 to 5 (10,001 to 19,500 lbs). Use to estimate the market size specifically for commercial medium-duty vehicles.
Changed in 4.0: Class 6 vehicles (19,501 to 26,000 lbs) moved from Medium to Heavy, so the groups match Altitude AADT.
How factors are built
-
Segment factors. On each road segment with an Altitude AADT estimate, Altitude divides the modeled AADT by Altitude Observed Counts for the same vehicle group, after summing both directions.
-
Filters. Altitude removes a segment factor before aggregation if it fails any of these filters:
Filter Rule AADT delivery standards
The segment's modeled AADT meets AADT delivery standards (interval width, minimum observed signal, observed-to-modeled ratio).
Minimum factor
Factors below 1 are removed (observed traffic cannot exceed total traffic).
Minimum market share
Segments with a Universal factor above 500 (market share below 0.2%) are removed.
Outliers
Factors more than 1.5 times the interquartile range outside the middle 50% for their zone, road type, and vehicle group are removed.
-
County and state factors. Altitude averages the remaining segment factors within each county and state, weighted by segment length, for each road type and for All. Each zone has up to 18 factors: three vehicle groups across six road-type categories.
Expansion Factors not available
Expansion Factors are provided only when they meet defined filters. If an Expansion Factor is not available for a specific zone level (such as a county), it is estimated using the appropriate state-level Expansion Factor. Every state in the US has Expansion Factors for 2022 through 2025.
Expansion Factors that are estimated from a surrounding geography are flagged with isEstimated. The flag is set only for these estimated values. It is not set for forecasted years.
Where a county has no remaining segments for a road type and vehicle group, the state factor is used, as long as segments of that road type exist in the county. About 1% of county All factors (no more than 1.5% for any vehicle group) and 4% to 5% of county road-type factors are estimated. Every county has factors for every vehicle group and year.
Lower and upper bounds
Each factor has a lower and upper bound: the factor multiplied by one minus and one plus the mean absolute percentage error (MAPE) of the Altitude AADT model for the zone, road type, and vehicle group, with the lower bound no lower than 1. Where a MAPE is not available at that level, Altitude uses the next broader level, ending at a national value. Medium and Heavy bounds are wider than Universal bounds because their AADT models have larger errors.
The bounds cover the AADT model's error only. They do not cover the added error of applying one county or state factor to a single road segment (refer to Limitations).
Where MAPE is above 100%, which happens for some 2025 Medium zones, the lower bound is 1 and the band is not symmetric around the factor.
In the Expansion Factors tab and the API, the bounds appear as a ± value labelled CI 95% (ci95All in the API). The ± value is half the distance between the lower and upper bounds, rounded to 0.1. The label is historical: these are not statistical 95% confidence intervals.
Which factor to use
Match the factor to the volume being expanded: same vehicle group, year, zone, and road type. When several apply, use them in this order:
- County, by road type
- County, All
- State, by road type
- State, All
Road-type factors are typically four to five percentage points more accurate than All factors, and county factors six to nine points more accurate than state factors.
Example: with a county Universal Primary factor of 120 and a MAPE of 0.18, an observed volume of 50 vehicles a day on a Primary segment expands to an estimated 6,000 vehicles a day, with bounds of 4,920 to 7,080.
Limitations
-
One factor per zone. A county or state factor cannot capture differences between the segments inside it. Applied to a single segment, a county road-type factor has a median error of 30% to 38%, against 17% to 23% for Altitude AADT itself. Where segment-level precision is needed, use Altitude AADT directly.
-
Projected year. 2025 factors come from forecast AADT and are indicative until HPMS publishes 2025 data.
-
Fleet mix. Altitude observes a mostly commercial fleet. On roads with unusual traffic, such as recreational routes with heavy passenger car volumes, a Universal factor may not represent the segment well.
-
Annual averages. Applying a factor to a shorter period assumes Altitude's share of traffic in that period equals its annual average.
-
Filtered slices. Applying a factor to a subset of a vehicle group (for example, one vocation) assumes Altitude's share for that subset equals its share for the whole group.
-
Coverage. Factors cover the 50 states and the District of Columbia.
Canadian Expansion Factors are not currently available. If Canadian Expansion Factors are important for your business, reach out to Altitude Support or talk to your account advisor at Altitude by Geotab.
What changed from 3.1
Values change from 3.1, including for years that were already available. Typical changes in the median factor (road type All, 2022 and 2023):
| Vehicle group | County factors | State factors |
|---|---|---|
Universal |
About 30% to 36% lower |
About 23% to 30% lower |
Medium |
About 3.3 to 3.7 times higher |
About 3.2 to 3.5 times higher |
Heavy |
About 28% to 40% higher |
Roughly unchanged (0.88 to 0.97 times) |
The change also depends on road type, most of all for trucks. 3.1 applied one state-level truck share to every road type; 4.0 models truck volumes for each road type. Median county Heavy factors are about six times their 3.1 value on Motorways and 2.7 times on Trunk roads, and are lower on Tertiary roads (0.75 times).
If a project is partway through and the 3.1 values are needed to finish it, contact your account advisor.